14.5 APPEARANCE SPECIFICATION Description Reject criteria D 0.3 : To be zero Film dent Foreign Dot type 0.3 D 0.2 : To be max 2points interval of faults is 50mm min. Material Between 0.2 D : None-specify Glass & D1+D2 D2 Film D1 2 Line type Scratch Film dot type blur Film hard-coat Missing Glass flaw [mm] W 0.1 : refer to "Dot type" 0.1 W 0.05 With L 5 : To be zero 0.1 W 0.05 With L 5 : To be max 2points interval of faults is 50mm min. 0.5 W : None-specify W : Width [mm] L : Length [mm] Area 0.5mm : To be zero Area 0.3mm2 0.5mm2 : To be max. 5 points Area 0.3mm2 : None-specify To be no flaw which size is over the drawing specified as Below. Number of flaw is none-specify. Traveling flaw is none. 3mm Flaw of thickness-direction Size is glss-thickness max. 2 5mm 5mm 2mm Sh. KAOHSIUNG HITACHI 7B64PS 2714- SP14N01L6ALCA-5 PAGE 14-3/3 DATE Mar.25,'10 No. ELECTRONICS CO.,LTD.